Victron EV Charging Station NS:
The EV Charging Station NS has three-phase and single-phase capabilities. It delivers a maximum of 22kW AC in three-phase or 7.3kW in single-phase mode.
The device is technically identical to the EV Charging Station, but with a new, modern design available in 3 colours and without the built-in LCD screen. Initial setup, configuration and monitoring is done from VictronConnect via Bluetooth and/or the integrated web interface via a WiFi Access Point or a WiFi LAN.
Data sheet here
Note: Must be installed by a licensed Electrician
The charger can be fully integrated with and remotely controlled via a Victron Energy GX Device and VRM. Not only does this EV Charging Station NS fully integrate with a Victron Energy GX device and VRM, if you have solar (within the Victron ecosystem), it can also be set up to allow excess energy from the sun to directly charge your vehicle. Manual and scheduled modes offer even more flexibility to respond to the needs of the EV depending on the system.
It has a fully programmable RGB light ring around the charging port that displays different light effects depending on the current status (disconnected, charging, charged, etc.) to quickly determine the device status.
High power EV Charging Station- The EV Charging Station NS has three-phase and single-phase capabilities. It delivers a maximum of 22 kW AC in three-phase or 7.3kW in single-phase mode. It comes with a blue front. A black or white front can be purchased separately.
WiFi Communication- WiFi: 802.11 b/g/n for configuration, monitoring and control. The internal WiFi module can be configured in Access Point or Station mode for both, the initial setup and monitoring.
Easy operation and control via Bluetooth and the VictronConnect App- Get full control and overview of all operating parameters and session statistics at a glance.
Light Ring for fast viewing the device state- Fully programmable RGB Light Ring around the charging port to quickly determine the device state. It can be programmed from the integrated web interface to display different light effects based on the current state (disconnected, charging, charged etc.).
Integration with GX devices and VRM- Control and monitor the EV Charging Station NS from a GX device touch display and the Remote Console and the VRM Portal. The VRM Portal also offers real time and custom reports for configurable time periods.
Note: The charger comes with a Blue shell, but you can purchase a replacement colour in Black or White options:
- Victron Black front for EV Charging station NS - EVC200300310
- Victron White front for EV Charging station NS - EVC200300410