Victron Cyrix-Li-Charge 12/24V-230A Intelligent Charge Relay - CYR010230430
Victron Energy Logo

Victron Cyrix-Li-Charge 12/24V-230A Intelligent Charge Relay - CYR010230430


🔋🔋 25% OFF Discover Lithium Blue Sale! 🔋🔋 Ends in.....

 {timer}

 


Regular price $305.80 Sale price$275.22
/
Tax included. Shipping calculated at checkout.

Victron Cyrix-Li-Charge relay:

 
The Cyrix-Li-Charge will connect a battery charger with 3 seconds delay:
- If the charge disconnect output of the VE.Bus BMS is high
- If it senses 13,0 V (resp. 26,0 V or 52,0 V) or more on its battery charger connection terminal
- If it senses 2 V or more on its battery terminal (the Cyrix will remain open if not connect to the battery).


The Cyrix-Li-Charge will disengage immediately whenever its control input becomes free floating, signalling cell over voltage or cell over temperature. In general, a cell over voltage alarm will reset shortly after charging has been stopped. The Cyrix will then reconnect the charger after a delay 3 seconds. When the Cyrix-Li-Charge is engaged (charger connected to battery) it will disengage after 1 hour to check if the charger is still enabled. If, after the Cyrix has disengaged, the output of the battery charger immediately increases to 13,0 V or more, the Cyrix will reengage, with a 3 seconds delay.
Note: In case of zero discharge current, or a small discharge current, the Cyrix will not disengage shortly after the charger has been switched off and/or disconnected, because battery voltage will remain higher than 13,5 V.

 

Data sheet here


Features:

 

LED status indication:
LED on: engaged LED 10 s flash: disengaged
LED 2 s flash: connecting LED 2 s blink: disconnecting
LED 0,25 s blink: alarm (over temperature; voltage > 16 V; both batteries < 10 V; one battery < 2 V) (multiply by two for 24 V)

 

The LiFePO4 battery: preventing cell under voltage, over voltage and over temperature- The first line of protection is cell balancing. All Victron LiFePO4 batteries have integrated cell balancing. The second line of protection consists of:
- Shut down of the load in case of imminent cell under voltage
- Shut down or reduction of the charging current in case of imminent cell over voltage, high temperature (>50°C) or low temperature (<0°C).


The VE.Bus BMS is the core of the second protection line. However, not all loads or chargers can be controlled directly by the VE.Bus BMS. In order to shut down such loads or chargers several VE.Bus BMS controllable Cyrix switches are available.

SolarBox Australia will process your order within 1-2 business days. For product availability you can call us, use the chat function or email SolarBox directly at: jason@solarboxaustralia.au If there is a delay on your order or your item is out of stock you will be emailed immediately to let you know.

Shipping prices are calcuated at checkout depending on weight and where it is being shipped to. View the shipping rules here

What is a warranty? A warranty is a voluntary promise offered by the person or business who sold the product or service to you. Once you buy the product or service, the promise becomes a right that can be enforced under the ACL. Warranties are separate from your automatic consumer guarantees. The consumer guarantees which apply regardless of any warranties suppliers sell or give to you, apply for a reasonable time depending on the nature of the goods or services. This means consumer guarantees may continue to apply after the time period for the warranty has expired.

View the product warranty page here for more information.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.